subject
Engineering, 05.05.2020 04:42 biancaadenisee2

A defrost heater is integrated with the sun roof glass in order to prevent ice from forming. The sun roof begins at L1 = 0.3 m from the front of the roof and extends to L2 = 0.6 m. The roof is W = 1.2 m wide. The car is driving at u[infinity] = 10 m/s through air at T[infinity] = -15°C. Assume that the properties of the air are conductivity k = 0.023 W/m-K, density  = 1.3 kg/m3 , viscosity  = 1.65x10-5 Pa-s, and specific heat capacity c = 1003 J/kg-K. The defrost heater is a thin sheet of electrically resistive material that covers the entire sun roof and transfers a uniform heat flux to the glass. The convection coefficient between the interior surface of the roof and the cabin air is sufficiently low that convection heat transfer with the interior can be neglected. Assume that the flow over the roof remains laminar. Do not use a correlation to solve this problem; instead, use your conceptual knowledge of boundary layer behavior to estimate the answers

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, viicborella
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
image
Engineering, 04.07.2019 18:10, soreese02
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
image
Engineering, 04.07.2019 18:10, ayoismeisjjjjuan
Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges
Answers: 1
image
Engineering, 04.07.2019 18:10, nandalabella06
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
You know the right answer?
A defrost heater is integrated with the sun roof glass in order to prevent ice from forming. The sun...

Questions in other subjects:

Konu
Mathematics, 03.01.2020 05:31
Konu
Advanced Placement (AP), 03.01.2020 05:31