subject
Engineering, 05.05.2020 04:26 bryan519688

The undisturbed soil at given borrow pit is found to have the following property:
w = 15%; y = 19.1 kN/m^3; Gs = 270
The soil from this borrow pit is to be used to construct a rolled fill having a finished volume of 38, 500 m^3. The soil is excavated by means of a shovel and dumped onto trucks saving a capacity of 4 00 m^3 each. When loaded to capacity, these trucks are found to contain, on the average, a net weight of toil and water equal to 72.7 kN
In the construction process. the trucks dump their load on the fill and the materials spread and broken up, after which a sprinkler adds water until the moisture content is equal to 18%. The soil and water are thoroughly mixed by a disc (or similar equipment) and then compacted until the dry unit weight is equal to 17.3 kN/m^3.
1. Assuming that each load is a full capacity load, how many truckloads are required to construct the fill?
2. How many liters of water will have to be added per truck load, assuming that the moisture tots by evaporation during excavation, haulage, and handling it negligible?

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, bryneosburn
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
image
Engineering, 04.07.2019 18:10, lowkeyqueenk
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
image
Engineering, 04.07.2019 18:10, kevin72836
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
image
Engineering, 04.07.2019 18:10, samanthabutryn
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
You know the right answer?
The undisturbed soil at given borrow pit is found to have the following property:
w = 15%; y...

Questions in other subjects:

Konu
English, 15.11.2019 11:31