Engineering, 05.05.2020 04:24 yeeeeeeeeeeet21

Carbon disulfide has the following physical properties:Flashpoint -22Â°FBoiling point 46.5Â°CDensity 1.261Vapor density 2.64Lower flammable limit 1.3%Upper flammable limit 50%8-hour TWA PEL 20 ppm

An industrial process liberates 3 cubic feet of carbon disulfide per hour into a room that measures 10 feet by 20 feet and has a ceiling height of 8 feet.

(a) Calculate the minimum general exhaust ventilation (cubic feet/hour) necessary to prevent a general safety hazard for the process.
(b) Calculate the minimum general exhaust ventilation (cubic feet/hour) necessary to prevent a general health hazard for the process.
(c) Carbon disulfide is which of the following: 1. Class IA flammable liquid 2. Class IB flammable liquid 3. Class IC flammable liquid 4. Class II combustible liquid 5. Class III combustible liquid

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 19:30, 10040813

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

continue

Engineering, 04.07.2019 18:10, niyawilliams23

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

continue

Engineering, 04.07.2019 18:10, alyssabailey7545

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

continue

Engineering, 04.07.2019 18:10, aaliyah80

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Answers: 1

continue

You know the right answer?

Carbon disulfide has the following physical properties:Flashpoint -22Â°FBoiling point 46.5Â°CDensity...