Engineering, 05.05.2020 05:25 clickbaitdxl

Very long pipe of 0.05 m (r1) radius and 0.03 m thickness (r2 - r1) is buried at a depth of 2m (z) to transport liquid nitrogen. The top surface of the ground is flat and has a uniform temperature. The pipe wall has a very low thermal conductivity of 0.0035 Wm-1K-1 and receives a cooling power of 10 W/m to keep the liquid nitrogen at 77 K. If the thermal conductivity of the ground is 1 Wm-1K-1, what is the surface temperature of the ground

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, brooklyn674

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

continue

Engineering, 04.07.2019 18:10, skpdancer1605

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

continue

Engineering, 04.07.2019 18:10, caitlynnpatton1208

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

continue

Engineering, 04.07.2019 18:20, sarah7984

Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false

Answers: 2

continue

You know the right answer?

Very long pipe of 0.05 m (r1) radius and 0.03 m thickness (r2 - r1) is buried at a depth of 2m (z) t...