subject
Engineering, 05.05.2020 06:15 PONBallfordM89

The displacement volume of a 4-stroke internal combustion engine is 2.8 liters. The processes within each cylinder of the engine are modeled as an air standard Diesel cycle with a compression ratio of 16.2 and a cutoff ratio of 2.3. The state of the air at the beginning of compression is fixed by P1 = 1.4 bar, T1 = 340 K. The engine speed is 4200 RPM. Determine the following: a) p-v diagram of the process with the states clearly labeled. by the compression ratie: c) the maximum temperature, in K and maximum pressure, in bars. d) the net work per cycle, in kJ. e) the power developed by the engine, in kW. f) the thermal efficiency. g) vary the cut-off ratio parametrically between 1.5 and 3, and plot the efficiency, the work per cycle, the power and the highest temperature (T3) as a function of this cut-off ratio.

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 16:10, Arealbot
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
image
Engineering, 04.07.2019 18:10, Strick1530
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
image
Engineering, 04.07.2019 18:10, wirchakethan23
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
image
Engineering, 04.07.2019 19:20, rosemary909
In the winter, in order to keep the classroom steadily at 68 f before 10 pm, heating with an average rate of 42,000 btu/hr is provided. assume the outdoor temperature maintains at 32°f, determine the electrical power (kw) required to (a) operate a reversible heat pump (b) operate a real heat pump with a cop (7) of 4.5 and (c) operate an electrical-resistance heater.
Answers: 3
You know the right answer?
The displacement volume of a 4-stroke internal combustion engine is 2.8 liters. The processes within...

Questions in other subjects: