Engineering, 05.05.2020 08:07 janyiareese12

A long, cylindrical, electrical heating element of diameter D = 12 mm, thermal conductivity k = 240 W/m ⋅ K, density rho = 2700 kg/m3 , and specific heat cp = 900 J/kg ⋅ K is installed in a duct for which air moves in cross flow over the heater at a temperature and velocity of 30°C and 8 m/s, respectively. (a) Neglecting radiation, estimate the steady‐state surface temperature when, per unit length of the heater, electrical energy is being dissipated at a rate of 1000 W/m. (b) If the heater is activated from an initial temperature of 30°C, e

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:10, juansoto227711

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

Answers: 2

continue

Engineering, 04.07.2019 18:20, mjcbs21

What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.

Answers: 3

continue

Engineering, 06.07.2019 02:30, josediaz1124

Around steel bar, made from material with a yield stress of 750mpa, is loaded so that it has stresses co locations of maximum normal stress and maximum shear stress. use maximum shear stress and maximum distortion energy theories to calculate the safety factors for initial yielding failures.

Answers: 3

continue

You know the right answer?

A long, cylindrical, electrical heating element of diameter D = 12 mm, thermal conductivity k = 240...