5) Initially, the pressure and temperature of steam inside a solid capsule is at 100-pound force per square inch absolute (psia), and 600 degrees Fahrenheit (°F), respectively. Because heat is gradually removed from this container, the pressure inside the capsule drops by the amount of 10-pound force per square inch absolute (psia). Answer the following questions, A. (10 points) The change of entropy per unit mass between the initial and final states B. (5 points) The amount of heat transfer per unit mass for the process C. (5 points) Sketch the T-s diagram for the process, showing the associated values of the thermodynamic properties for states and 2 on your sketch.

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.