subject
Engineering, 06.05.2020 02:57 mnknmklhnklnj2583

Steam enters a turbine with a pressure of 3.0 MPa and temperature of 400°C. Saturated vapor at 100°C leaves the turbine. At steady state, the turbine develops work in the amount of 540 kJ/kg of steam flowing through the turbine. Ignore the heat loss from the turbine to its surroundings. Determine the rate of heat transfer per kg of steam flowing. a. - 17.8 kJ/kg b. - 14.8 kJ/kg c. - 20.8 kJ/kg d. - 1094.8 kJ/kg

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, volleyballfun24
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
image
Engineering, 04.07.2019 18:20, kodyclancy
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
image
Engineering, 04.07.2019 19:10, alex6toes
What are the major differences between injection molding and extrusion?
Answers: 2
image
Engineering, 04.07.2019 19:10, kelseiroll9759
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
You know the right answer?
Steam enters a turbine with a pressure of 3.0 MPa and temperature of 400°C. Saturated vapor at 100°C...

Questions in other subjects:

Konu
Physics, 12.12.2020 17:00
Konu
Mathematics, 12.12.2020 17:00