Engineering, 06.05.2020 04:17 landonp101
Nitrogen gas is compressed from 80 kPa and 27°C to 480 kPa by a 10-kW compressor.
Determine the mass flow rate of nitrogen through the compressor, assuming the compression process to be (a) isentropic, (b) polytropic with n = 1.3, (c) isothermal, and (d) ideal two-stage polytropic with n = 1.3.
Answers: 1
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 19:20, GusGus11
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
Nitrogen gas is compressed from 80 kPa and 27°C to 480 kPa by a 10-kW compressor.
Deter...
Deter...
Mathematics, 29.03.2021 17:40
Mathematics, 29.03.2021 17:40
Spanish, 29.03.2021 17:40
Mathematics, 29.03.2021 17:40