Engineering, 06.05.2020 04:10 topangabraith

The flow velocity in a water tunnel is measured with a pitot tube connected to a pre?sure transducer. The dynamic pressure decreased by the pressure transducer is related to the velocity, V, by pd- (pVA2)/2. The electrical output of the pressure transducer, E, was found to be related to the flow velocity by: E-aVA2 +b. To calibrate the measurement system the following measurements were made.

col1 Transducer Output 2.85 3.61 4.415.00 9.24 (volts)
col2 Velocity (m/s) 0.77 1.14 1.38 1.48 2.28 Determine (use 3 significant digits minimum): The constant a and b. using the summations The standard error of the fit. The width of the 95% confidence interval for the voltage, E, in Volts (assume a well- controlled independent variable) The static sensitivity in terms of a and b The correlation coefficient of the fit, r

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:20, CelesteN64

Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options

Answers: 2

continue

Engineering, 04.07.2019 18:20, cristykianpour

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

continue

Engineering, 04.07.2019 19:10, brid7931

Aplate of dimensions 3 m x 3 m is placed 0.37 mm apart from a fixed plate. the plate requires a force of 2n to move at speed of 45 cm/s. evaluate the viscosity of the fluid in between the plates

Answers: 3

continue

Engineering, 04.07.2019 19:10, 592400014353

For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.

Answers: 2

continue

You know the right answer?

The flow velocity in a water tunnel is measured with a pitot tube connected to a pre?sure transducer...