Engineering, 06.05.2020 05:11 7letters22
One way to cool chips mounted on the circuit boards of a computer is to encapsulate the boards in metal frames that provide efficient pathways for conduction to supporting cold plates. Heat generated by the chips is then dissipated by transfer to water flowing through passages drilled in the plates. Because the plates are made from a metal of large thermal conductivity (typically aluminium or copper), they may be assumed to be at a temperature, Ts, cp.
Consider circuit boards attached to cold plates of height H = 750 mm and width L = 600 mm, each with N 10 passages of diameter D = 5 mm. If operating conditions maintain plate temperatures of Ts, cp-50°C with water flow at m =0.2 kg/s per passage and Tmi =70C, how much heat may be dissipated by the circuit boards? Evaluate the properties of water at 290 K.
Answers: 3
Engineering, 04.07.2019 18:10, leomessifanboy678
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
Engineering, 04.07.2019 18:10, oliviasoreo92
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 18:20, safiyabrowne7594
Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?
Answers: 3
One way to cool chips mounted on the circuit boards of a computer is to encapsulate the boards in me...
Advanced Placement (AP), 04.05.2021 19:00
Mathematics, 04.05.2021 19:00