Engineering, 06.05.2020 06:16 ochoachanna

Consider the Nordex 1.3 MW, 60-m diameter, wind turbine with operating conditions and output power given in the table below, located in an area with 8 m/s average wind speeds. a. Find the average power in the wind (W/m2 ) assuming Rayleigh statistics. b. Create a spreadsheet determine the energy delivered (kWh/yr) from this machine. c. What would be the average efficiency of the wind turbine? d. If the turbine’s rotor operates at 70% of the Betz limit, what is the efficiency of the gearing and generator?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, DestyHilBan1183

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

continue

Engineering, 04.07.2019 18:10, Talos02

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

continue

Engineering, 04.07.2019 18:10, ijohnh14

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

continue

Engineering, 04.07.2019 18:20, samantha636

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

continue

You know the right answer?

Consider the Nordex 1.3 MW, 60-m diameter, wind turbine with operating conditions and output power g...