A geothermal power plant uses geothermal water extracted at 150°C at a rate of 210 kg/s as the heat source and produces 8000 kW of net power. The geothermal water leaves the plant at 90°C.

If the environment temperature is 25°C, determine

(a) the actual thermal efficiency,
(b) the maximum possible thermal efficiency,
(c) the actual rate of heat rejection from this power plant.

What precautions should you take to prevent injuries when dealing with heavy loads?

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.