Engineering, 24.04.2020 16:03 tonnie179

A part is loaded with a combination of bending, axial and torsion such that the following stresses are created at a particular location:
Bending: Completely reversed with a maximum stress of 41MPa.
Axial: Constant stress of 18 MPa.
Torsion: Repeated load, varying from 0 MPa to 55 MPa.
Assume the varying stresses are in phase with each other. The part contains a notch such that Kf, bending = 1.3, Kf, axiel =1.1, and Kf, torsion = 2.0. The material properties are Sy = 300 MPa and Su = 400 MPa. The completely adjusted endurance limit is found to be Se = 200 MPa.
1. Using the Goodman criterion, find the factor of safety for fatigue based on infinite life. If the life is not infinite, estimate the number of cycles. Be sure to check for yielding. Round the answers to two decimal places.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, salazjlove

Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation

Answers: 1

continue

Engineering, 04.07.2019 18:20, sarah7984

Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:20, DroctorWellsfan

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

continue

Engineering, 04.07.2019 18:20, ashleyjaslin

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

continue

You know the right answer?

A part is loaded with a combination of bending, axial and torsion such that the following stresses a...