Engineering, 24.04.2020 03:16 marianaescamilla404
Suppose a person (height of 1.8 m) walks in a room installed with a pyroelectric infrared (PIR) motion detector. The distance between the person and the PIR detector is 5 m. The PIR detector sensor is 3 cm x 1 cm in size.
Estimate the radiated power at the surface of the sensor from the person. Assume that emissivity of human skin/fabric and sensor cap is 0.9. Assume that the person’s body temperature is 37°C and the temperature at the surface of PIR detector is at 18°C. Also assume that there is no radiated power loss through air and Fresnel lens. You can roughly estimate surface area of the person.
Answers: 2
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:20, krojas015
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
Engineering, 04.07.2019 19:10, justkevin1231
Which of the following is the most important advantage of a large field of view? a. allows larger areas to be examined b. relieves eyestrain c. minimizes parallax errors. d. increases precision in proportion to the in- crease in field of view
Answers: 2
Engineering, 04.07.2019 19:20, GusGus11
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
Engineering, 06.07.2019 02:30, heavenwagner
A12 mm diameter shaft runs in a plain cylindrical bush 30 mm long that is located in an 18 mm diameter hole in a housing. the shaft-inner bush fit is h8 f and the outer bush-housing fit is h7-p6. make a fully cimensioned sketch of the bush with tolerances. find the maximum and minimum clearance or interference for both fits on the inner and outer diameters of the bush
Answers: 3
You know the right answer?
Suppose a person (height of 1.8 m) walks in a room installed with a pyroelectric infrared (PIR) moti...
Questions in other subjects:
History, 29.01.2021 19:10
History, 29.01.2021 19:10
English, 29.01.2021 19:10
