Engineering, 23.04.2020 20:56 abhibhambhani

Using the AASHTO 1993 Flexible Pavement Design Procedure, design a pavement cross section that will provide 10 years service. The initial PSI is 4.2 and the final PSI is determined to be 2.5. The subgrade has a soil resilient modulus of 18,000 psi. Reliability is 95% with an overall standard deviation of 0.4. For design, the daily truck traffic consists of 400 passes of trucks with two single axles and 350 passes of semitrailer truck with tandem axles. The axle weights are:

Single-Unit truck = 8000-lb steering, single axle

= 22,000-lb drive, single axle

Semiunit truck = 10,000-lb steering, single axle

= 16,000-lb drive, tandem axle

= 34,000-lbs trailer, tandem axle

M2 and M3 are equal to 1.0 for the materials in the pavement structure.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:10, Fahaddie

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

continue

Engineering, 04.07.2019 19:10, nbunny7208

What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces. a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.

Answers: 1

continue

Engineering, 04.07.2019 19:10, nhester3401

Agas is compressed from vi 0.3 m, p 1 bar to of v2 0.1 m3, p2--3 bar. pressure and volume are related linearly during the process. for the gas, find the work, in kj.

Answers: 2

continue

You know the right answer?

Using the AASHTO 1993 Flexible Pavement Design Procedure, design a pavement cross section that will...