Engineering, 23.04.2020 17:42 odetteerivera

An adiabatic heat exchanger is to cool ethylene glycol (cp = 2.56 kJ/kg ºC) flowing at a rate of 2 kg/s from 80 to 40 ºC by liquid water that enters at 20 ºC and leaves at 55 ºC. Determine:

(a) the rate of heat transfer between the water and the ethylene glycol and
(b) the rate of entropy generation in the heat exchanger

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, mm016281

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

continue

Engineering, 04.07.2019 18:10, redrosesxx

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

continue

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Engineering, 04.07.2019 18:10, namira16

Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.

Answers: 2

continue

You know the right answer?

An adiabatic heat exchanger is to cool ethylene glycol (cp = 2.56 kJ/kg ºC) flowing at a rate of 2 k...