Engineering, 23.04.2020 01:04 riri95
A pipe 300 m long has a slope of 1 in 100 and tapers from 1.2 m diameter at the high end to 0.6 m diameter at the low end. Quantity of water flowing is 5400 liters per minute. If the pressure at the high end is 68.67 kPa, find the pressure at the low end. Neglect head loss.
Answers: 3
Engineering, 04.07.2019 19:10, kelseiroll9759
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
Engineering, 04.07.2019 19:20, dndndndnxmnc
The process in which the system pressure remain constant is called a)-isobaric b)-isochoric c)-isolated d)-isothermal
Answers: 3
Engineering, 06.07.2019 03:20, lelen2021
Steam at a pressure of 100 kpa and a quality of 50% initially fills a rigid vessel having a volume of 0.5 m^3. the steam is then heated, causing the pressure in the vessel to rise to 150 kpa. determine: i. the mass of the steam in the vessel. ii. the temperature and quality of the steam after the heating process. ii the mass of the vapour, mg and liquid, m in the vessel after the heating process. if the steam in the vessel is now further heated, what would the pressure and temperature in the vessel be when all steam has turned into saturated vapour? b. sketch the processes in part (a) and part (b) on p-v and t-v diagrams, indicating clearly the temperatures, pressures and the paths. c. (0.59kg, 111.4°c, 73%, 0.4307kg, 0.1 593kg, 2.11 bar, 121.84°c)
Answers: 1
A pipe 300 m long has a slope of 1 in 100 and tapers from 1.2 m diameter at the high end to 0.6 m di...
Social Studies, 29.09.2019 16:10
History, 29.09.2019 16:10
Biology, 29.09.2019 16:10
Spanish, 29.09.2019 16:10
History, 29.09.2019 16:10