Engineering, 22.04.2020 22:12 hanz73
Consider a venture with a small hole drilled in the side of the throat. This hole is connected via a tube to a closed reservoir. The purpose of the venture is to create vacuum in the reservoir when the venture is placed in an airstream. (The vacuum is defined as the pressure difference below the outside ambient pressure.) The venture has a throat to inlet area ratio of 0.85. Calculate the maximum vacuum obtainable in the reservoir when the venturi is placed in an airstream of 90 m/s at standard sea level conditions.
Answers: 3
Other questions on the subject: Engineering
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10, anna22684
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10, demarcuswiseman
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
You know the right answer?
Consider a venture with a small hole drilled in the side of the throat. This hole is connected via a...
Questions in other subjects:
History, 22.07.2019 06:30
Business, 22.07.2019 06:30
