subject
Engineering, 22.04.2020 16:49 alyssa32900

A steam coil is immersed in a stirred heating tank. Saturated steam at 7.50 bar condenses within the coil , and the condensate emerges at at its saturation temperature. A solvent with a heat capacity of 2.30 kJ is fed to the tank at a steady rate of 12.0 kg/min and a temperature of 25°C, and the heated solvent is discharged at the same flow rate. The tank is initially filled with 760 kg of solvent at 25°C, at which point the flows of both steam and solvent are commenced. The rate at which heat is transferred from the steam coil to the solvent is given by the expression where UA (the product of a heat transfer coefficient and the area through which the heat is transferred) equals 11.5 kJ/min·°C. The tank is well stirred, so that the temperature of the contents is spatially uniform and equals the outlet temperature.

Write a differential energy balance on the tank contents.

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, ahmedeldyame
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
image
Engineering, 04.07.2019 18:10, qwertylol12345
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
image
Engineering, 04.07.2019 18:10, agpraga23ovv65c
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
image
Engineering, 04.07.2019 18:20, moneywaydaedae
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
You know the right answer?
A steam coil is immersed in a stirred heating tank. Saturated steam at 7.50 bar condenses within the...

Questions in other subjects:

Konu
Mathematics, 17.12.2020 01:10
Konu
History, 17.12.2020 01:10
Konu
Mathematics, 17.12.2020 01:10
Konu
Mathematics, 17.12.2020 01:10