A commercial enclosed gear drive consists of a 20o spur pinion having 16 teeth driving a 48-tooth gear. The pinion speed 350 rev/min, the face width 2 in, and the diametral pitch 6 teeth/in. The gears are grade 1 steel, through-hardened at 240 Brinell, made to No. 6 quality standards, uncrowned, and are to be accurately and rigidly mounted. Assume a pinion life of 108 cycles and a reliability of 0.90. Determine the AGMA bending and contact stresses and the corresponding factors of safety if 5 hp is to be transmitted.

Check the explanation

Explanation:

Generally, when there is a pair of gears meshing, the minor gear is referred to as the pinion gear. in addition, it involves the meshing of cylindrical gear with a rack in a rack-and-pinion system which transforms to linear motion from a rotational motion.

Rack and pinion gears are mostly utilized in converting rotation into linear motion.

Kindly check the attached images below for the full step by step explanation to the question above.

i'd try logging out, closing the browser, and unplugging the computer for a few seconds and then start everything back up again and log in. if it still doesn't work, maybe try clicking slower. or close a couple tabs or other windows you may have up

I don't know much ab computers but I hope this helped

An artesian well is simply a well that doesn't require a pump to bring water to the surface; this occurs when there is enough pressure in the aquifer. The pressure forces the water to the surface without any sort of assistance.

Hope it helps!