subject
Engineering, 22.04.2020 03:42 sadielebaron

A converging-diverging nozzle with a rectangular cross-section and exit area ratio AAee⁄AAtt = 4.0 operates in an under-expanded condition. The working gas is air, the back pressure away from the nozzle exit is ppaa = 10 kPa, and the stagnation pressure is pp0 = 500 kPa. The exit pressure is greater than the back pressure (ppee > ppaa), so expansion waves form outside the exit. For the given conditions, what is the Mach number on the downstream side of the first set of expansion waves, and what is the turning angle?

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, yasminothman02
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
image
Engineering, 04.07.2019 18:10, genyjoannerubiera
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
image
Engineering, 04.07.2019 18:20, rocio5649
Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa. s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)
Answers: 3
image
Engineering, 04.07.2019 19:10, babas97
What is a monomer? how do they form a ploymer from the view point of chemical bonding?
Answers: 1
You know the right answer?
A converging-diverging nozzle with a rectangular cross-section and exit area ratio AAee⁄AAtt = 4.0 o...

Questions in other subjects:

Konu
Mathematics, 07.12.2019 17:31