Engineering, 22.04.2020 00:39 MrTeriffic
A two-phase line has the following phase impedance matrix: [zabc] = [0.4576 + j1.0780 0 0.1535 + j0.3849 0 0 0 0.1535 + j0.3849 0 0.4615 + j1.0651] Ω/mile The line is two miles long and serves a two-phase constant power load such that: Sag = 2000 kVA at 0.9 lagging power factor and voltage of 7620 <0 V Scg = 1500 kVA at 0.95 lagging power factor and voltage of 7620<120 V Neglect the shunt admittance and determine the following: The source line-to-ground voltages using the generalized matrices. The complex power by phase at the source and the power loss by phase on the line. Discuss the impact of including shunt impedance in calculation on source currents
Answers: 1
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, kevin72836
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
Engineering, 04.07.2019 18:20, ashleyjaslin
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 18:20, rhussein6452
Wiy doeres rere okhn a pump whon working betwon the same pressure range?
Answers: 2
Engineering, 04.07.2019 18:20, Doogsterr
For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor
Answers: 3
You know the right answer?
A two-phase line has the following phase impedance matrix: [zabc] = [0.4576 + j1.0780 0 0.1535 + j0....
Questions in other subjects:
