Once you test your program with the part1testsequence, and you are sure the program performs correct address translation, use the following sequence file as the input file for logical addresses sequence to generate the translated physical addresses and put them in a file called part1-output. Then, compute the md5sum checksum on part1-output. Type the checksum for part1-output into REPORT. txt.

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k

How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?