Engineering, 22.04.2020 03:24 janiyahlanae66

The power P generated by a certain windmill design depends upon its diameter D, the air density , the air viscosity µ, the wind velocity V, the rotation rate Ωand the number of blades n. (a) Write this relationship in dimensionless form. A model windmill, of diameter 50 cm, develops 3.8 kW at sea level when V  40 m/s and when rotating at 4200 rpm. (b) What power will be developed by a geometrically and dynamically similar prototype, of diameter 15 m, in winds of 35 m/s at 500 m standard altitude from sea level? (c) What is the appropriate rotation rate

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, mm016281

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

continue

Engineering, 04.07.2019 18:10, meganwintergirl

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

continue

Engineering, 04.07.2019 18:10, Fahaddie

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

continue

Engineering, 04.07.2019 18:20, annette211pdd8v9

For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.

Answers: 1

continue

You know the right answer?

The power P generated by a certain windmill design depends upon its diameter D, the air density , th...