Engineering, 21.04.2020 19:25 sabrinarasull1pe6s61

Voltage readings are tabulated in the data below. The LVDT used for measurements is a RDP Electrosense ACT1000A, powered at 7 VAC. Use the information to determine the average thickness of each sheet, which are outside tolerance and the average thickness of the "good" sheets. What gauge sheet metal is being produced?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, oliviasoreo92

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

continue

Engineering, 04.07.2019 18:10, tobyhollingsworth178

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

continue

Engineering, 04.07.2019 18:10, mirmir62

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

continue

Engineering, 04.07.2019 19:10, kimmy6973

What is creep? what is stress relaxation?

Answers: 1

continue

You know the right answer?

Voltage readings are tabulated in the data below. The LVDT used for measurements is a RDP Electrosen...