Engineering, 21.04.2020 04:30 itsmaddierae11

The steel bar has a 20 x 10 mm rectangular cross section and is welded along section a-a. The weld material has a tensile yield strength of 325 MPa and a shear yield strength of 200 MPa, and the bar material has a tensile yield strength of 350 MPa. An overall factor of safety of at least 2.0 is required. Find the largest load P that can be applied, to satisfy all criteria.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 18:10, hadellolo8839

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

continue

You know the right answer?

The steel bar has a 20 x 10 mm rectangular cross section and is welded along section a-a. The weld m...