Engineering, 20.04.2020 21:22 s11074739
Consider the adiabatic compressor from a refrigerator that uses refrigerant R-134a as the working fluid, flowing at 0.05 kg/s. The refrigerant enters the compressor as a saturated vapor at a pressure of 0.14 MPa. The pressure of the refrigerant at the exit of the compressor is 0.8 MPa. Please interpolate for this problem where needed.
a. If the compressor is isentropic, what is the exit temperature?
b. What is the minimum amount of power (work) that this compressor might theoretically use?
c. If the isentropic efficiency of the actual, non-ideal, compressor is 0.85, what is the actual amount of power (work) that this compressor requires?
d. What is the entropy generated by this device? Assume that the compressor is adiabatic.
Answers: 1
Engineering, 04.07.2019 18:10, settasav9641
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10, Tyrant4life
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
Engineering, 04.07.2019 18:20, hayleymckee
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 18:20, kodyclancy
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
Consider the adiabatic compressor from a refrigerator that uses refrigerant R-134a as the working fl...
History, 29.10.2020 03:50
History, 29.10.2020 03:50
Geography, 29.10.2020 03:50
Mathematics, 29.10.2020 03:50
Mathematics, 29.10.2020 03:50
French, 29.10.2020 03:50