A small vehicle is powered by a pulsejet. The available net thrust is 6000 N and the traveling speed is 200 km/hr. The gases leave the engine with an average velocity (Ve) of 360 m/s Assume pressure equilibrium exists at the outlet plane and the fuel to air ratio is 0.06.

a. Compute the mass flow rate required
b. Calculate the inlet area (assume To is 16 °C and Po is one atmosphere)
C. Calculate the thrust power
d. Calculate the propulsive efficiency

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

On a average work day more than work place firs are reorted

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.