Engineering, 18.04.2020 03:04 mrfishyyyy

A binary mixture of benzene(1) and toluene(2) is flashed to 75 kPa and 90°C. Analysis of the effluent liquid and vapor streams freom the separator yields: x1 = 0.1604 and y1 = 0.2919.
An operator remarks that the product streams are "off-spec", and you are asked to diagnose the problem.
(a) Verify that the exiting streams are not in binary equilibrium.
(b) Verify that an air leak into the separator could be the cause.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 08:10, doggo242

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

continue

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Engineering, 04.07.2019 18:10, juansoto227711

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

Answers: 2

continue

Engineering, 04.07.2019 18:20, samantha636

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

continue

You know the right answer?

A binary mixture of benzene(1) and toluene(2) is flashed to 75 kPa and 90°C. Analysis of the effluen...