Engineering, 17.04.2020 03:50 mprjug6
A company is measuring the loss coefficient for a new valve. The valve is placed in a section of pipe with diameter D = 9 cm. The flow rate is Q = 0.05 m3/s. If the pressure drop is Δp = 61.73 kPa, what is the loss coefficient for the valve? The specific weight of water is γw = 9.802 kN/m3
Answers: 2
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 03.07.2019 15:10, theamandawhite
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:20, ashleyjaslin
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 19:10, santosbeti90
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
A company is measuring the loss coefficient for a new valve. The valve is placed in a section of pip...
Mathematics, 26.09.2019 17:30
Spanish, 26.09.2019 17:30
Social Studies, 26.09.2019 17:30
Mathematics, 26.09.2019 17:30
Mathematics, 26.09.2019 17:30
Chemistry, 26.09.2019 17:30
History, 26.09.2019 17:30