subject
Engineering, 17.04.2020 03:30 katiemh8302

You have been hired to run a hydrogen production plant. The fixed cost (amortization of the equipment, and the buildings, salaries, taxes, etc.) amounts to cF=$2000/day regardless of how much hydrogen is produced. The electrolyzer consists of N cellsconnected in series, each having the characteristic, V=V0+RintI The utility will provide electric energy at a price, c(in $/kWh), that can vary from day to daydepending on availability. Each day you must adjust the hydrogen production rates , Hprod. rate(kg/day) so as to minimize the cost of the gas. To this end, you must develop a formula that tells you the optimal production rate as a function of c. Calculate the Hydrogen production rate that leads to the cheapest gas for the case in which there are 250 series connected cells, each one having the characteristic V=1.42+20*10-6I Do this for an electric energy cost of 2 cents per kWh. Thank you very much for your help

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, yasminothman02
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
image
Engineering, 04.07.2019 18:10, samanthabutryn
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
image
Engineering, 04.07.2019 18:10, wyattlb97
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
image
Engineering, 04.07.2019 18:10, mirmir62
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
You know the right answer?
You have been hired to run a hydrogen production plant. The fixed cost (amortization of the equipmen...

Questions in other subjects:

Konu
Mathematics, 25.09.2020 23:01