Engineering, 17.04.2020 02:26 sairaanwar67

In a 2-pole, 208 V (line-to-line, rms), 60-Hz, motor, Rs 1⁄4 0:5 Ω, R0r 1⁄4 0:45 Ω, X‘s 1⁄4 0:6 Ω, and X 0‘r 1⁄4 0:83 Ω. The magnetizing reactance Xm 1⁄4 28:5 Ω. This motor is supplied by its rated voltages. The rated torque is developed at the slips 1⁄4 0:04. At the rated torque, calculate the rotor power loss, the input current, and the input power factor of operation.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, dval1146

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

continue

Engineering, 04.07.2019 18:20, luisgonz5050

Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k

Answers: 3

continue

Engineering, 04.07.2019 18:20, rjone8429

Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency

Answers: 1

continue

Engineering, 04.07.2019 18:20, 21megoplin

How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s

Answers: 2

continue

You know the right answer?

In a 2-pole, 208 V (line-to-line, rms), 60-Hz, motor, Rs 1⁄4 0:5 Ω, R0r 1⁄4 0:45 Ω, X‘s 1⁄4 0:6 Ω, a...