Engineering, 17.04.2020 00:52 johnkings140

The following information is provided for the initial mix design: Cement = 700 lbs Coarse Aggregate (OD) = 1,710 lbs Absorption = 1.0% Moisture Content = 1.90% Fine Aggregate (OD) = 1,170 lbs Absorption = 0.90% Moisture Content = 5.0% Water = 294 lbs 1. Calculate the adjusted coarse aggregate batch weight? 2. Calculate the adjusted fine aggregate batch weight? 3. Calculate the adjusted water batch weight: 4. The

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:20, hayleymckee

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

continue

Engineering, 04.07.2019 18:20, yasyyas646646

Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.

Answers: 3

continue

Engineering, 04.07.2019 19:10, Destinationz

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

continue

Engineering, 04.07.2019 19:10, santosbeti90

With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.

Answers: 1

continue

You know the right answer?

The following information is provided for the initial mix design: Cement = 700 lbs Coarse Aggregat...