Engineering, 16.04.2020 21:03 ptrlvn01
An automobile radiator may be viewed as a cross-flow heat exchanger with both fluids unmixed. Water enters the radiator at a flow rate of 0.05 kg/s and a temperature of 400 K, and leaves the radiator at 330 K. The water is cooled by air that enters at a rate of 0.75 kg/s with a temperature of 300 K. (a) If the overall heat transfer coefficient is 200 W/m2K, what is the required heat transfer surface area
Answers: 2
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, krystabrewer3
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
Engineering, 04.07.2019 18:20, hayleymckee
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 19:20, lovenahofer
Apreheater involves the use of condensing steam at 100°c on the inside of a bank of tubes to heat air that enters at 1 atm and 25°c. the air moves at 5 m/s in cross flow over the tubes. each tube is 1 m long and has an outside diameter of 10 mm. what is the minimum value of nl needed to achieve an outlet temperature of t 75 c? what is the corresponding pressure drop across the tube bank?
Answers: 3
You know the right answer?
An automobile radiator may be viewed as a cross-flow heat exchanger with both fluids unmixed. Water...
Questions in other subjects:
History, 11.08.2021 19:20
