Engineering, 16.04.2020 20:18 bellamore

3. Water is the working fluid in a Rankine cycle. Superheated vapor enters the turbine at 10 MPa, 480 C, and the condenser pressure is 6 kPa. The turbine and pump have isentropic efficiencies of 80% and 70% respectively. Determine for the cycle (a) the heat transfer to the working fluid passing through the steam generator in kJ/kg, (b) the thermal efficiency, and (c) The heat transfer from the working fluid passing through the condenser to the cooling water in kJ/kg

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, tjeffers90028

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

continue

Engineering, 04.07.2019 18:10, jesuslovesusall3

Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs

Answers: 2

continue

Engineering, 04.07.2019 18:20, rjone8429

Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency

Answers: 1

continue

Engineering, 04.07.2019 19:10, Calliedevore

The proportional limit is always greater than the yield strength for a material. a)-trune b)- false

Answers: 3

continue

You know the right answer?

3. Water is the working fluid in a Rankine cycle. Superheated vapor enters the turbine at 10 MPa, 48...