subject
Engineering, 16.04.2020 03:24 winterblanco

A mass weighing 64 pounds stretches a spring 0.32 foot. The mass is initially released from a point 8 inches above the equilibrium position with a downward velocity of 5 ft/s. (a) Find the equation of motion. (b) What are the amplitude and period of motion? (c) How many complete cycles will the mass have completed at the end of 3p seconds? (d) At what time does the mass pass through the equilibrium position heading downward for the second time? (e) At what times does the mass attain its extreme displacements on either side of the equilibrium position? (f) What is the position of the mass at t 3 s? (g) What is the instantaneous velocity at t 3 s? (h) What is the acceleration at t 3 s? (i) What is the instantaneous velocity at the times when the mass passes through the equilibrium position? (j) At what times is the mass 5 inches below the equilibrium position? (k) At what times is the mass 5 inches below the equilibrium position heading in the upward direction?

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, volleyballfun24
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
image
Engineering, 04.07.2019 18:10, niicoleassssssf
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
image
Engineering, 04.07.2019 18:10, aliopqwas
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
image
Engineering, 04.07.2019 18:20, AnonymousLizard52303
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
You know the right answer?
A mass weighing 64 pounds stretches a spring 0.32 foot. The mass is initially released from a point...

Questions in other subjects:

Konu
Mathematics, 12.02.2021 17:10