subject
Engineering, 16.04.2020 01:47 Lindsay882

Return air from a house enters an air-conditioning unit at 72oC, 70% relative humidity with a volumetric flow rate of 1800 ft3 /min where it is mixed with 900 ft3 /min of outside air at 90oF, 80% relative humidity. Refrigerant-22 enters the evaporator coil with a quality of 22% at 90 lbf/in.2 and exits at 90 lbf/in.2 , 50oF. Condensate is drained away at 48oF, and the moist air stream exiting the evaporator coil is saturated at 50oF. The air leaving the heating section is at 66oF. The flow through the duct is at 14.7 lbf/in.2 Determine, for steady state operation with no significant kinetic or potential energy effects, (a) the mass flow rate of refrigerant, in lb/min, (b) the rate of heat transfer in the heating section, in Btu/h, and (c) the relative humidity of the supply air.

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, koolgurl2003
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
image
Engineering, 04.07.2019 18:10, qwertylol12345
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
image
Engineering, 04.07.2019 18:10, salazjlove
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
image
Engineering, 04.07.2019 18:20, Doogsterr
For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor
Answers: 3
You know the right answer?
Return air from a house enters an air-conditioning unit at 72oC, 70% relative humidity with a volume...

Questions in other subjects:

Konu
Mathematics, 14.09.2020 07:01
Konu
Health, 14.09.2020 07:01
Konu
Mathematics, 14.09.2020 07:01
Konu
Mathematics, 14.09.2020 07:01
Konu
Mathematics, 14.09.2020 07:01
Konu
Mathematics, 14.09.2020 07:01
Konu
Mathematics, 14.09.2020 07:01
Konu
Health, 14.09.2020 07:01
Konu
Social Studies, 14.09.2020 07:01
Konu
Mathematics, 14.09.2020 07:01