Engineering, 16.04.2020 01:26 lucarignot

A heating system must maintain the interior of a building at TH = 20°C when the outside temperature is TC = 10°C. If the rate of heat transfer from the building through its walls and roof is 15 kW, determine the electrical power required, in kW, to heat the building using: (a) electrical-resistance heating; (b) a heat pump whose coefficient of performance is 4; (c) a reversible heat pump operating between hot and cold reservoirs at 20°C and 10°C, respectively.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:20, 3076850

Prove the equivalence between the two statements of the 2nd law of thermodynamics (i. e., a violation of one statement leads to the violatio the other statement)

Answers: 2

continue

Engineering, 04.07.2019 18:20, AnonymousLizard52303

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.

Answers: 3

continue

Engineering, 04.07.2019 19:10, Mimidj9279

The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false

Answers: 2

continue

Engineering, 04.07.2019 19:10, justkevin1231

Which of the following is the most important advantage of a large field of view? a. allows larger areas to be examined b. relieves eyestrain c. minimizes parallax errors. d. increases precision in proportion to the in- crease in field of view

Answers: 2

continue

You know the right answer?

A heating system must maintain the interior of a building at TH = 20°C when the outside temperature...