subject
Engineering, 16.04.2020 00:47 sairaanwar67

The following information is available for a seeded 5-day BOD test conducted on a wastewater sample. 15 mL of the waste sample was added directly into a 300-mL BOD incubation bottle and then 285 mL of dilution water was added to fill the bottle. The initial DO of the diluted sample was 8.8 mg/L and the final DO after 5 days was 1.9 mg/L. 1. Assuming that the BOD5 of 285 mL dilution water is 0 mg/L. What is the 5-day BOD (BOD5) of the wastewater sample 2. In reality, the dilution water usually has its own BOD. In a control experiment of determining the BOD5 of dilution water with seed microorganisms, the initial DO of dilution water was 9.1 mg/L and the final DO after 5 days was 7.9 mg/L. What is the 5-day BOD (BOD5) of the wastewater sample

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, cowgyrlup124
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
image
Engineering, 04.07.2019 18:10, lerasteidl
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
image
Engineering, 04.07.2019 18:10, Strick1530
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
image
Engineering, 04.07.2019 18:10, wirchakethan23
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
You know the right answer?
The following information is available for a seeded 5-day BOD test conducted on a wastewater sample....

Questions in other subjects: