Engineering, 15.04.2020 20:06 ziyonsolange

A thick-walled, stainless steel (AISI 316) pipe of inside and outside diameters 25 mm and 40 mm is heated electrically to provide a uniform heat generation rate of 0.8 × 106 W/m3. The outer surface of the pipe is insulated, while water flows through the pipe at a rate of 0.1 kg/s. Evaluate the properties of the stainless steel (AISI 316) at 400 K. Assume the tube surface is smooth and use the Gnielinski correlation for the Nusselt number. (a) If the water inlet temperature is 20°C and the desired outlet temperature is 40°C, what is the required pipe length, in m?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 04.07.2019 18:10, settasav9641

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

continue

Engineering, 04.07.2019 18:10, michellerosas

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

continue

Engineering, 04.07.2019 18:10, demarcuswiseman

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

continue

You know the right answer?

A thick-walled, stainless steel (AISI 316) pipe of inside and outside diameters 25 mm and 40 mm is h...