Engineering, 15.04.2020 17:31 JalenBunting2441

A shell-and-tube heat exchanger is used for cooling 47 kg/s of a process stream flowing through the tubes from 160 C to 100°C. This heat exchanger has a total of 100 identical tubes, each with an inside diameter of 2.5 cm and negligible wall thickness. The average properties of the process stream are: rho 950 kg/m3, k = 0.50 w/m. K, cp-3.5 kJ/kg-K and μα 2.0 mPa-s. The coolant stream is water (cp- 4.18 kJ/kg K) at a flow rate of 66 kg/s and an inlet temperature of 10 C, which yields an average shell-side heat transfer coefficient of 4.0 kW/m2-K. Calculate the tube length if the heat exchanger has

(a) a 1-shell pass and a 1-tube pass and
(b) a 1-shell pass and 4-tube passes 1.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, viicborella

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

continue

Engineering, 04.07.2019 18:10, wyattlb97

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

continue

Engineering, 04.07.2019 18:20, Doogsterr

For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor

Answers: 3

continue

Engineering, 04.07.2019 19:10, kimmy6973

What is creep? what is stress relaxation?

Answers: 1

continue

You know the right answer?

A shell-and-tube heat exchanger is used for cooling 47 kg/s of a process stream flowing through the...