(a) In a 3-phase, 4-wire system, the currents are in the A, B, and C lines under abnormal conditions of loading were as follows: IA = 100/30° A, 1b = 50/300° A, and Ic = 30/180° A

(i) Calculate the positive, negative, and zero-phase sequence currents in the A-line.
(ii) Calculate the return current in the neutral conductor.

(b) Check by sketching IA, IB, and Ic as the sum of the appropriate symmetrical components.

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.