Engineering, 15.04.2020 03:51 lllamasarebae3076
Question 7.1: Two possible overhead valve combustion chambers are being considered – the first has two valves; the second has four valves per cylinder. The diameter of the inlet valve is 23 mm for the first design and 18.5 mm for the second design. If the second design is adopted, show that the total valve perimeter is increased by 60.8%. If the valve lift is restricted to the same fraction of valve diameter, calculate the increase in flow area. What are the additional benefits in using 4 valves per cylinder?
Answers: 2
Engineering, 04.07.2019 18:10, Tyrant4life
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
Engineering, 04.07.2019 18:20, rjone8429
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Engineering, 04.07.2019 18:20, cxttiemsp021
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
Question 7.1: Two possible overhead valve combustion chambers are being considered – the first has t...
Biology, 05.07.2019 23:00
History, 05.07.2019 23:00
History, 05.07.2019 23:00
History, 05.07.2019 23:00
History, 05.07.2019 23:00