subject
Engineering, 15.04.2020 02:10 oliviakgobbell

An aluminum alloy with a yield strength of 350 MPa and a tensile strength of450MPaexhibits a Basquin's Law of σarNf0.1=750MPa. If the alloy is subjected to zero-to-tension fatigue loading, with σmax= 250 MPa, in how many cycles will the alloy fail?(2.3 x 106cycles)After 1.0 x 106cycles at this loading, it is decided that the lifetime needs to be extended by an additional 4.0 x 106cycles in "zero-to-tension" loading. What is the new maximum stress that can be appliedin zero-to-tension loading?(115MPa)

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, hadellolo8839
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
image
Engineering, 04.07.2019 18:10, meganwintergirl
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
image
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
image
Engineering, 04.07.2019 18:10, colin774
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
You know the right answer?
An aluminum alloy with a yield strength of 350 MPa and a tensile strength of450MPaexhibits a Basquin...

Questions in other subjects:

Konu
Arts, 16.04.2021 20:00
Konu
Mathematics, 16.04.2021 20:00
Konu
Mathematics, 16.04.2021 20:00
Konu
Social Studies, 16.04.2021 20:00