subject
Engineering, 15.04.2020 02:11 xarianna2007

SAE 50 oil flows at a mass flow rate of 0.007 kg/s through a 1-cm I. D. tube that is 1.5 m long. The wall temperature is at 300 K and the inlet oil temperature is 377 K. Calculate: (1) The average heat transfer coefficient, (2) the oil temperature at the outlet, and (3) the convective heat loss from the oil

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, aliceohern
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
image
Engineering, 04.07.2019 18:10, mm016281
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
image
Engineering, 04.07.2019 18:10, xboxdude06
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
image
Engineering, 04.07.2019 18:20, maciemarklin79981
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
You know the right answer?
SAE 50 oil flows at a mass flow rate of 0.007 kg/s through a 1-cm I. D. tube that is 1.5 m long. The...

Questions in other subjects:

Konu
Mathematics, 18.03.2021 20:00
Konu
Advanced Placement (AP), 18.03.2021 20:00
Konu
Mathematics, 18.03.2021 20:00