This is a follow-up to the previous question Water needs to be transported through a pipe (50 cm diameter) from a lower reservoir to an upper reservoir with an elevation change of 100 m. The friction head loss in the pipe is known to be given by 9.45V2/g m. The volume flow rate in the pipe is 1 m3/s Determine the rating of the pump required to achieve this.

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way