Engineering, 14.04.2020 19:17 shayshay4352

The lid on a pressure vessel is held down with 10 bolts that pass through the lid and a flange on the pressure vessel (similar to example 8-4, in the text). The bolts are secured with nuts under the flange. There are no washers. The thickness of the lid is 28 mm and the thickness of the flange is 28 mm. The vessel and lid are both made of steel. The vessel is pressurized to 8 MP a, and the area of the lid exposed to the pressure is 31.4e3 mm². The modulus of elasticity is 207 GPa. The chosen bolts are ISO property class 9.8 and are coarse-pitch series, M12.
Find the external load, P, on each bolted joint.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:20, safiyabrowne7594

Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?

Answers: 3

continue

Engineering, 04.07.2019 19:10, nani3906

Starting wih an energy balance on a rectangular volume element, derive the one- dimensional transient heat conduction equation for a plane wall with constant thermal conductivity and no heat generation.

Answers: 1

continue

Engineering, 04.07.2019 19:10, kayleeemerson77

Analyze the factors that influence the choice between the following pairs of processes to make the products indicated: i) sand casting versus die casting of an electric-motor housing ii) thread rolling versus machining of a bolt for high-strength application. (co3/c5)

Answers: 3

continue

Engineering, 04.07.2019 19:20, GusGus11

The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.

Answers: 3

continue

You know the right answer?

The lid on a pressure vessel is held down with 10 bolts that pass through the lid and a flange on th...