A fluid with an average speed of 2.1 m/s flows through commercial steel tubing with an inside diameter of 2 mm and a length of 200 m. The tube inlet can be modeled as re-entrant. The discharge end of the tube is 60 m lower than the inlet. Calculate the pressure drop assuming the fluid is:

a) air with average properties of 100 C,200 kPa.
b) water with an average temperature of 20 C

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false