subject
Engineering, 14.04.2020 16:31 wittlemarie

A spur gearset has a pinion speed of 1120 rev/min. there are 17 teeth on the pinion and 51 teeth on the gear. the pressure angle is 20 deg and the overload factor ko=1 the diameteral pitch is 6 tetth/ in and the face width of 2 in the pinion cycle life is to be 108 rev at a reliablity of 0.99. the quality number is 5. the material is a through hardened steel, grade 1 with brinell hardness of 232 core and case of both gear. for a design factor of 3 what is the capacity in hp of the pinion cnosidering only bending Ks=1

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
image
Engineering, 04.07.2019 18:10, kevin72836
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
image
Engineering, 04.07.2019 18:10, Fahaddie
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
image
Engineering, 04.07.2019 18:10, oliviasoreo92
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
You know the right answer?
A spur gearset has a pinion speed of 1120 rev/min. there are 17 teeth on the pinion and 51 teeth on...

Questions in other subjects:

Konu
Mathematics, 08.12.2020 21:10
Konu
Social Studies, 08.12.2020 21:10